TTS Gauge Mount for GM Trucks

Replace the dash pocket or blank panel on your 1999-2007 Classic Chevrolet or GMC GMT-800 with a new TTS Gauge Mount. Angled towards the diver for easy viewing from the driver’s seat, the TTS Gauge Mounts are in the same color and matted finish as your factory dash. Available with or without an opening for a switch

$29.95 each

 

Creating the perfect gauge mount that would retain the factory OEM mounting points AND
hold a standard 2 1/16th gauge at a compound angle to allow quick viewing by the driver was the project.

Using the existing factory retention points and mounting clips to provide a part that closely matched the look and feel from the factory was a design concern..

Several prototype parts were printed in a 3D printer to allow installation in the vehicle for testing before the final part design was created and the plastic injection mold was built from the solid models.

The final revision of the Gauge Pocket Mount shown as a solid model.
Utilizing the existing space next to the radio, the gauge pocket mount has the exact same mounting tang arrangement as the factory part it replaces. With the gauge mounted on a compund angle (tilted up and toward the driver) the driver can steal a look at the gauge with a click glance, without having to turn his head.

Gently pull the dash bezel forward (pull the trans lever all the way down)
Remove the existing map pocket, or airbag switch bezel.
Using a small screwdriver, gently release the retention hooks on the factory clips from the plastic and remove the metal clips from the old unit.
Slide the old clips onto the new mount assembly.
Snap the new mount into the existing factory mounting slots.
Push firmly on the mount until the snaps "click" into place.
Replace the dash bezel.    



 
Some parts are not legal for sale or use in California on any pollution controlled motor vehicles.
All returned items are subject to a 10% restocking fee.